The real estate industry is probably the most influential area of ​​our lives, especially against the backdrop of rising housing prices, a trend that has been going on for too long. It’s very important, and it’s at this point that it’s time for start-up Nation to reach construction sites as well. And we have brought some notable innovations in the field, which can affect the stage between receiving the coveted building permit and the moment the key is handed over to the new tenants.

From China to the Netherlands

“The incoming government faces significant national challenges, including tackling housing prices, along with rising and growing unmet demand,” says Ytong CEO Uri Loft. Concepts for a variety of reasons: lack of land marketing, lengthy planning procedures and an increase in the construction input index.

“There are many plans that try to find solutions to the variety of reasons listed above, but they do not address a significant part of the problem and is the conservative construction method currently used in Israel,” he explains. “This is a traditional, outdated, cumbersome and slow method, which takes a very long time compared to construction in the world. One of the examples that illustrates how inefficient it is is the need to straighten the walls after construction – an action that increases construction costs and requires additional work time. Low productivity in the construction industry relative to other industries in the economy and very low compared to productivity in the construction industry in European and US countries.

Loft gives as an example a video of a Chinese construction company, published about a week ago, showing the construction of a 28-story building in ten days. “This is of course an impressive display of purpose in the field and another vision for the time, but there are equally advanced methods that can be applied relatively simply in private or saturated construction. In the Netherlands, for example, there are construction products that allow fast, green and accurate construction.” Multi and manpower and is based on a block produced with the most advanced technology in the world.

Of course, it is necessary to adapt the product to the local market and establish appropriate factories and facilities. “If the regulator works to promote the issue with the manufacturing companies and with the standards institutes and gives a significant incentive to the construction companies and professionals in the industry to adopt the methods in question, there is a chance that it will even succeed.”

Advanced construction in the country is currently gaining momentum, mainly under the heading of light construction. In this construction, which is very common in Europe and the USA, the building components are manufactured in a factory and brought to the construction site in their entirety, where only the various components are connected. “One of the solutions we present to the market today is ‘pre-panels’. “These are boards made of the Itung block that attach to the steel skeleton of the building and create a durable, stable wall, with high thermal values, fire resistance and hanging strength for heavy weights,” he emphasizes.

Railway, compaction shafts and public buildings.

“We are soon launching a course for advanced, fast and green construction, designed for construction supervisors who want to know the field in depth. This allows for a faster pace of construction and a structure with significantly higher thermal and green values ​​than those that exist in traditional construction. “

Robotic assistance

Due to the lack of work and skills, ABB is leading the automation industry with new robotic solutions that will help address challenges such as lowering housing prices, more environmentally friendly real estate and reducing construction accidents. “The use of robots in traditional industry, Innovation. The combination of advanced technology in traditional industries increases the safety, efficiency, and speed of promoting construction projects, which in practice will help reduce construction costs and enable young couples and people with disabilities to achieve sustainable housing, “says Ronen Aharon, CEO of ABB Israel. “It is important that the state be involved in promoting the entry of those innovative technologies, because today the biggest barrier to entry is the conservatism of the traditional industries, which rely mainly on manual labor.

“Today few construction companies use automation. Unlike building or assembling electronics, the techniques used in construction have not changed for generations, so we are developing new solutions to address industry challenges. The discourse today around health, safety and sustainability is a catalyst for investment in robotics. It needs robots to meet the challenges of urbanization and climate change, “explains Aharon.

In a global survey conducted by the company among CEOs and decision makers in large and small businesses in the field of construction in Europe, the US and China, it was found that 91% thought that the construction industry was facing a recruitment crisis in the next decade. 81% of construction businesses said they would integrate or expand the use of robotics and automation in the next decade. The survey also shows that almost half of the respondents answered that they currently have difficulty recruiting workers for construction jobs. It should be noted that according to the Global Construction Report, forecasts predict that by 2030 the total value of the global construction industry will rise by 85% to $ 15.5 trillion worldwide.

From savings to safety

When thinking of the construction industry one tends to imagine heavy tools and working in the field, but like any veteran industry, construction sites also fit into the virtual landscape, and the software world is increasingly entering project management. “We develop cloud services with web and mobile applications to make the planning information accessible visually, quickly, smartly and instantly to all stakeholders in the project,” explains Ilai Rotbain, senior director leading the construction solutions development activities at Autodesk. “The tools we develop enable the transition from thousands of printed paper plans to a smart and complete digital process for all construction processes – from early planning, execution and operation of the building. We are proud to serve the major construction companies in Israel and around the world and help them plan and execute huge projects in housing, commerce and infrastructure. The demand for apartments, the expansion of infrastructure and the shortening of schedules require the adoption of new methods and advanced technologies for managing the process. “

“The success of a construction project is measured by several things,” he points out. “In addition to profit margins, which are of course a key metric, quality and safety in construction are painful issues in the country, and we believe they can certainly be streamlined using technological tools. And allow site workers to return home safely at the end of the day.The combination of planning information with schedules, logistics, quality, safety and communication metrics in the project, create an accurate snapshot of the project and its risk management.We also use machine learning based algorithms to gain further insights Futures based on past patterns.

According to Rothbain, the construction industry is one of the largest industries in the world and accounts for more than 13% of global GDP, but he emphasizes that it is also one of the most inefficient, non-technological and polluting industries: “Despite significant improvements in building materials engineering Of industrial production of houses and buildings, the industrial revolution has not yet reached the construction market, and the vast majority of the industry in Israel and around the world continues to be based on methods that are decades and centuries old.As at the forefront of this revolution About each and every one of us.

“As a software company that grew out of building design and construction solutions, we see a huge opportunity to propel a $ 10 trillion industry and bring modern technologies to every construction site, to improve construction efficiency and quality and the level of safety in the process and greatly reduce waste in the industry. Global today. “

By Editor

Leave a Reply