Young babies are more susceptible to infections, so feeding equipment should be very clean. A bottle left with milk at room temperature can quickly become a breeding ground for bacteria. That’s why the first and most important step is washing immediately after use or an orderly separation until washing, disassembling all parts of the bottle, cleaning with soap and water, using a clean brush and air drying on a clean surface.

In the first months, and especially in premature babies, babies with a weakened immune system or very young babies, it is more important to disinfect according to medical instructions or the instructions of the local Ministry of Health. Disinfection can be done by boiling, in a dedicated device or by other methods designed for this, as long as they are used correctly. But disinfection does not replace cleaning. If dirt or milk residue remains, the disinfection is less effective.


baby bottle Cleaning before disinfection | Photo: Shutterstock

One of the most dangerous mistakes is leaving a baby with a supported bottle unattended. Beyond the danger of suffocation and inhaling liquid, it is also a violation of feeding habits. A baby needs an adult who holds him, watches his rhythm and stops when necessary. Feeding is not a technical act of introducing milk into the body, but a safe interaction.

When should equipment be replaced? When there are cracks, tears in the nipple, discoloration, an odor that has not disappeared, mold, worn parts or a bottle that has fallen and been damaged. A torn nipple can change the flow rate and cause choking or swallowing air.

The practical recommendation is to build a simple routine: a reasonable number of bottles, immediate washing, clean drying, disinfection according to age and medical condition, and avoiding reuse of milk that has stood for too long. Good hygiene doesn’t have to look like panic. It should be permanent, simple and safe.

General warning signs that always require a visit to the emergency department:

By Editor

One thought on “The dirty bottle: how much should the baby’s equipment really be disinfected? | Dr. Itai Gal”
  1. Fabricante y proveedor de persianas de acero inoxidable TC
    Fabricant et fournisseur de raccords en acier inoxydable pour produits laitiers
    Fabricant et fournisseur de raccords hydrauliques 700 bars
    Fabricant et fournisseur de raccords hydrauliques E02
    Fabricant et fournisseur de raccords hydrauliques Hastelloy
    Fabricant et fournisseur de raccords hydrauliques haute pression
    Fabricant et fournisseur de robinets à boisseau sphérique en alliage de nickel
    Fabricant et fournisseur de robinets à soupape en acier Monel
    Fabricant et fournisseur de robinets à soupape en alliage de nickel
    Fabricant et fournisseur de soupapes de sécurité en acier Monel
    Fabricant et fournisseur de soupapes de sécurité en alliage de nickel
    Fabricante y proveedor de tes de acero inoxidable
    Fabricante y proveedor de válvulas de bola de acero dúplex y súper dúplex
    Fabricante y proveedor de válvulas de bola de aleación de níquel
    Fabricante y proveedor de válvulas de globo de aleación de níquel
    Fabricante y proveedor de válvulas de palanca
    Fabricante y proveedor de válvulas de retención de acero inoxidable.
    Fabricante y Proveedor de válvulas de seguridad de Acero Inoxidable
    Fabricante y proveedor de válvulas de servicio de oxígeno de acero Inconel
    Fabricante y proveedor de válvulas de oxígeno de acero inoxidable.
    Fabricant et fournisseur de robinets-vannes en acier Monel
    Fabricant et fournisseur de robinets-vannes en alliage de nickel
    Fabricante y proveedor de Fabricant et fournisseur de vannes de régulation en acier Monelde bola Monel
    Fabricant et fournisseur de vannes de régulation en alliage de nickel
    Fabricante y proveedor de válvulas Fabricant et fournisseur de vannes papillon en acier Monelbola Monel

Leave a Reply